Here are the trainings that match your search criteria.
And did you know, the average out-of-pocket cost is often less than $1,000? If you like what you see, to get started, fill out the form at the bottom of the page, or contact your local community college directly.
NCCER Core (WCG) Feb 4 – March 20 2025 Franklin
MANF 3990001
Section Code: WG1A
NCCER Core is designed as a rigorous, competency-based, industry-recognized program for career and technical education. Students may complete the required elements sooner or later than the recommended 150 hours of knowledge and skills-based instruction, depending on their individual proficiency in mastering the content. Core: Introduction to Basic Construction Skills provides individuals with basic safety and other necessary knowledge and skills to perform in an introductory capacity on project sites.
Read Full Course Description
Start Date: Feb 04, 2025
End Date: Mar 20, 2025
Community College: Paul D. Camp
Rigger and Signal Person (WITH NCCER CORE) WCG April 8 – May 13 2025
MANF 4160001
Section Code: WG1A
Upon completion of this NCCER Rigger and Signal Person certification course, students will have gained familiarity with basic rigging practices, crane safety, emergency procedures, principles of cranes, and crane communications. Additionally, students who successfully complete this course will be awarded Basic Rigger and Signal Person credentials by NCCER. Module 1, Rigging Practices; Module 2, Crane Safety and Emergency Procedures; Module 3, Basic Principles of Cranes; and Module 4, Crane Communications will be covered.
Read Full Course Description
Start Date: Apr 08, 2025
End Date: May 13, 2025
Community College: Paul D. Camp
Backflow Prevention Device Certification (WCG-SCHED) March 14-15 2025
WAST 3100002
Section Code: WG1B
Designed to help participants understand backflow and recognize cross-connections, this course places special emphasis on preparing individuals to test, inspect, and provide in-line maintenance of reduced pressure principle backflow prevention devices, double check valve assemblies, and pressure vacuum breakers. The course is for plumbing, mechanical, and fire suppression contractors, city building and plumbing officials, public utilities inspectors, water and wastewater personnel, health department officials, and engineers.* *Please note: This class satisfies the minimum 16-hour education requirement to sit for the state exam, to accompany the minimum 7 years of work experience...
Read Full Course Description
Start Date: Mar 14, 2025
End Date: Mar 15, 2025
Community College: Paul D. Camp
Marine Welder Level 1 (WCG) DAY Dec 2 – 20 2024
WELD 3930001
Section Code: WG4B
The course is 3 weeks (120 hours) long, designed to prepare candidates to enter a career in Marine Welding at various shipyards in the region. The course will cover the basics of stick welding with the AWS certification test included on the last day of class. The course provides the skills necessary for entry-level employment in the ship repair industry. Students for this class will be screened and selected by the Virginia Ship Repair Association (VSRP). For selection requirements, please see shiprepairtraining.com. In a partnership with the Virginia Ship Repair Association,...
Read Full Course Description
Start Date: Dec 02, 2024
End Date: Dec 20, 2024
Community College: Paul D. Camp
Patient Care Technician (PCT) WCG Feb 4 – May 4 2025
HLTH 2450001
Section Code: WG1A
Patient Care Technician Bundle with EKG Tech and Phlebotomy Tech
Read Full Course Description
Start Date: Feb 04, 2025
End Date: May 04, 2025
Community College: Paul D. Camp
Cert. Clinical Med. Assistant (CCMA) WCG HYBRID Feb. 3 – May 4 2025
HLTH 2100001
Section Code: WG1A
Clinical Medical Assistant Certification (WCG) is hybrid with course material on-line and hands-on labs. A medical assistant is a multi-skilled allied health care professional that specializes in procedures commonly performed in the ambulatory health care setting. Medical assistants perform both clinical and administrative duties and assist a variety of providers including physicians, nurse practitioners and physician assistants. They typically work in medical offices, clinics, urgent care centers and may work in general medicine or specialty practices. Common duties of a medical assistant include administrative and clinical tasks such as checking...
Read Full Course Description
Start Date: Feb 03, 2025
End Date: May 04, 2025
Community College: Paul D. Camp
Certified Phlebotomy Technician WCG HYBRID – Jan 13-Feb 2 2025
HLTH 2300001
Section Code: WG1A
Certified Phlebotomy Technician is a National Healthcareer Association Certificaiton (NHA). The Phlebotomy Technician class is offered as part of the Fast Track Healthcare Bundle (incl CMA and EKG) program AND as stand-alone class. As a Phlebotomy Technician, you may perform some or all of the following tasks: Draw blood from patients and blood donors. Evaluate patients ability to withstand procedure. Explain blood-drawing procedure to patients and answer questions. Perform basic point of care testing, such as blood glucose levels, Prepare blood, urine and other specimens for testing. Verify patient/donor identity and maintain medical equipment...
Read Full Course Description
Start Date: Jan 13, 2025
End Date: Feb 02, 2025
Community College: Paul D. Camp
NCCER IM E&I LEVEL 2 (WCG) Jan 20 – April 2 2025 (Franklin)
ELEC 3400004
Section Code: WG1A
NCCER ( National Center for Construction Education and Research ) – Industrial Maintenance, Electrical, and Instrumentation Level 2. This course will cover Industrial Safety for E & I Technicians, Introduction to the National Electrical Code, Electrical Theory, Alternating Current, E & I Test Equipment, Flow, Pressure, Level, and Temperature, Process Mathematics, Hand Bending, Tubing, Clean, Purge, and Test Tubing and Piping Systems, Instrument Drawings and Documents, Part 1, Conductors and Cables, and Conductor Terminations and Splices. This course prepares you to take the NCCER assessments and performance tests (testing costs...
Read Full Course Description
Start Date: Jan 20, 2025
End Date: Apr 02, 2025
Community College: Paul D. Camp
NCCER IM E&I Level 3 (WCG SCHED) Jan.13 – April 7 2025
ELEC 3400006
Section Code: WG1A
NCCER National Center for Construction Education and Research – Industrial Maintenance, Electrical, and Instrumentation Level 3. Learn about Hazardous Locations, Electronic Components, E & I Drawings, Motor Controls, Distribution Equipment, Transformers, Conductor Selection and Calculation, Temporary Grounding, Commercial and Industrial Electrical Services, Pipe Layout and Installation, Machine Bending of Conduit, Hydraulic and Pneumatic Controls and Motor-Operated Valves. This course prepares you to take the NCCER assessments and performance tests (testing costs included in tuition). NOTE: Must be 18 years old.
Read Full Course Description
Start Date: Jan 13, 2025
End Date: Apr 07, 2025
Community College: Paul D. Camp
Truck Driver Training (WCG-SCHED) Class B WeekDAY Nov 25 2024 – Jan 3 2025
TRNS 3800004
Section Code: WG5B
With a CDL Class B license, you can drive any single vehicle with a GVWR of 26,001 pounds or more. Any single vehicle with a GVWR of 26,001 pounds or more towing another vehicle with a GVWR of 10,000 pounds or less. This class includes Straight trucks, large buses, segmented buses, Trucks towing vehicles with GVWR of 10,000 pounds or less. The training school length is 3 weeks for a total of 120 hours (60 hours classroom and 60 hours hands-on). The class day is structured very close to a...
Read Full Course Description
Start Date: Nov 25, 2024
End Date: Jan 03, 2025
Community College: Paul D. Camp
Truck Driver Training (WCG-SCHED) Class A WeekDAY Nov 25 2024 Jan 3 2025
TRNS 3800002
Section Code: WG6B
This 120-hour course includes classroom and hands-on instruction. Students will learn applicable traffic and trucking laws from their state’s CDL manual and federal safety regulations. Students may learn about federal rules that apply to truck and cargo transportation, and they may learn how to complete relevant paperwork associated with transporting freight. Instruction then moves outdoors where students learn how to perform a pre-trip truck and freight inspection. Significant time is devoted to behind-the-wheel training. Drivers enrolled in CDL training practice their truck driving skills while accompanied by a driver that...
Read Full Course Description
Start Date: Nov 25, 2024
End Date: Jan 03, 2025
Community College: Paul D. Camp
Truck Driver Training (WCG-SCHED) Class B WeekDAY Oct 28 – Nov 25 2024
TRNS 3800004
Section Code: WG3B
With a CDL Class B license, you can drive any single vehicle with a GVWR of 26,001 pounds or more. Any single vehicle with a GVWR of 26,001 pounds or more towing another vehicle with a GVWR of 10,000 pounds or less. This class includes Straight trucks, large buses, segmented buses, Trucks towing vehicles with GVWR of 10,000 pounds or less. The training school length is 3 weeks for a total of 120 hours (60 hours classroom and 60 hours hands-on). The class day is structured very close to a...
Read Full Course Description
Start Date: Oct 28, 2024
End Date: Nov 25, 2024
Community College: Paul D. Camp
Truck Driver Training (WCG-SCHED) Class A WeekEND Jan 4 – March 9 2025
TRNS 3800002
Section Code: WG1B
This 120-hour course includes classroom and hands-on instruction. Students will learn applicable traffic and trucking laws from their state’s CDL manual and federal safety regulations. Students may learn about federal rules that apply to truck and cargo transportation, and they may learn how to complete relevant paperwork associated with transporting freight. Instruction then moves outdoors where students learn how to perform a pre-trip truck and freight inspection. Significant time is devoted to behind-the-wheel training. Drivers enrolled in CDL training practice their truck driving skills while accompanied by a driver that...
Read Full Course Description
Start Date: Jan 04, 2025
End Date: Mar 09, 2025
Community College: Paul D. Camp
Crane Operator (WCG) Dec 2 – 13 2024
MANF 4120001
Section Code: WG29
The Crane Operator program serves to meet the growing demand for the construction industry and places students on track to quickly learn how to operate crane types such as swing cab, fix cab, and crawler mounted cranes. Within three weeks, students will learn equipment safety, basic operational techniques and standards, and receive intensive hands-on training where you will learn to master load control and prepare for the NCCCO practical exams. Students will gain the knowledge and skills needed to earn the industry-recognized credential: National Commission for the Certifications of Crane...
Read Full Course Description
Start Date: Dec 02, 2024
End Date: Dec 13, 2024
Community College: Paul D. Camp
Outside Machinist (WCG SCHED) Dec 2 – 13 2024 (E Wilkerson)
MANF 3600002
Section Code: WG4B
Outside Machinist Level 1 – this is 2 weeks (80 hours) long designed to prepare candidates to enter the outside machinist department at NNS. The course will cover safety, an introduction to a variety of tools and machinist skills, a validation of basic machinist competencies, and an evaluation of employability skills. This program is designed to be 90% hands-on, focusing on a candidates ability to follow verbal and written instruction, display manual dexterity consistent with the craft, accomplish specific tasks in a reasonable time, and perform all activities in a...
Read Full Course Description
Start Date: Dec 02, 2024
End Date: Dec 13, 2024
Community College: Paul D. Camp
Fast Track Welding (WCG-SCHED) Evening Nov 4- Dec 12 2024 (Test 12/13/24)
WELD 4020002
Section Code: WG2B
The Fast Track Welding Program is a rigorous 3 week class, 20% instructional and 80% hands on training in welding that prepares students for the American Welding Society (AWS) Certification process. The program is designed to meet the workforce needs of regional and area employers.
Read Full Course Description
Start Date: Nov 04, 2024
End Date: Dec 13, 2024
Community College: Paul D. Camp
Marine Welder Level 1 (WCG) DAY Oct 28-Nov 15 2024
WELD 3930001
Section Code: WG3B
The course is 3 weeks (120 hours) long, designed to prepare candidates to enter a career in Marine Welding at various shipyards in the region. The course will cover the basics of stick welding with the AWS certification test included on the last day of class. The course provides the skills necessary for entry-level employment in the ship repair industry. Students for this class will be screened and selected by the Virginia Ship Repair Association (VSRP). For selection requirements, please see shiprepairtraining.com. In a partnership with the Virginia Ship Repair Association,...
Read Full Course Description
Start Date: Oct 28, 2024
End Date: Nov 15, 2024
Community College: Paul D. Camp
Outside Machinist (WCG SCHED) Oct 28 – Nov 8 2024 (T Willis)
MANF 3600002
Section Code: WG3B
Outside Machinist Level 1 – this is 2 weeks (80 hours) long designed to prepare candidates to enter the outside machinist department at NNS. The course will cover safety, an introduction to a variety of tools and machinist skills, a validation of basic machinist competencies, and an evaluation of employability skills. This program is designed to be 90% hands-on, focusing on a candidates ability to follow verbal and written instruction, display manual dexterity consistent with the craft, accomplish specific tasks in a reasonable time, and perform all activities in a...
Read Full Course Description
Start Date: Oct 28, 2024
End Date: Nov 08, 2024
Community College: Paul D. Camp
NCCER Core (WCG) Oct 21 – Dec 12 2024 Franklin
MANF 3990001
Section Code: WG3A
NCCER Core is designed as a rigorous, competency-based, industry-recognized program for career and technical education. Students may complete the required elements sooner or later than the recommended 150 hours of knowledge and skills-based instruction, depending on their individual proficiency in mastering the content. Core: Introduction to Basic Construction Skills provides individuals with basic safety and other necessary knowledge and skills to perform in an introductory capacity on project sites.
Read Full Course Description
Start Date: Oct 21, 2024
End Date: Dec 12, 2024
Community College: Paul D. Camp
Backflow Prevention Device Certification (WCG-SCHED) Oct 25-26 2024
WAST 3100002
Section Code: WG2B
Designed to help participants understand backflow and recognize cross-connections, this course places special emphasis on preparing individuals to test, inspect, and provide in-line maintenance of reduced pressure principle backflow prevention devices, double check valve assemblies, and pressure vacuum breakers. The course is for plumbing, mechanical, and fire suppression contractors, city building and plumbing officials, public utilities inspectors, water and wastewater personnel, health department officials, and engineers.* *Please note: This class satisfies the minimum 16-hour education requirement to sit for the state exam, to accompany the minimum 7 years of work experience...
Read Full Course Description
Start Date: Oct 25, 2024
End Date: Oct 26, 2024
Community College: Paul D. Camp
Certified Logistics Technician CLT Bundle (WCG) HYBRID Nov 11-Dec 4 2024 (Test 12/9)
MANF 3300004
Section Code: WG17
CLT Course (Mid-level Technical) This Course provides students with the mid-level technical knowledge needed to understand the world of supply chain logistics and related core competencies. Learning materials include PDF textbook and e-learning modules. This Course includes: product receiving, product storage, order processing, packaging and shipment, inventory control, safe handling of hazardous materials, evaluation of transportation modes, customs, and dispatch and tracking operations. PRE-REQUISITE: Certified Logistics Associate (CLA) NOTE: MSSC strongly recommends that individuals be at an 8th-grade math and 10th-grade reading level before taking our Courses.
Read Full Course Description
Start Date: Nov 11, 2024
End Date: Dec 09, 2024
Community College: Paul D. Camp
Truck Driver Training (WCG-SCHED) Class B WeekEND Jan 4 – March 9, 2025
TRNS 3800004
Section Code: WG1B
With a CDL Class B license, you can drive any single vehicle with a GVWR of 26,001 pounds or more. Any single vehicle with a GVWR of 26,001 pounds or more towing another vehicle with a GVWR of 10,000 pounds or less. This class includes Straight trucks, large buses, segmented buses, Trucks towing vehicles with GVWR of 10,000 pounds or less. The training school length is 3 weeks for a total of 120 hours (60 hours classroom and 60 hours hands-on). The class day is structured very close to a...
Read Full Course Description
Start Date: Jan 04, 2025
End Date: Mar 09, 2025
Community College: Paul D. Camp
Truck Driver Training (WCG-SCHED) Class A WeekEND Oct 12-Dec 15 2024
TRNS 3800002
Section Code: WG4B
This 120-hour course includes classroom and hands-on instruction. Students will learn applicable traffic and trucking laws from their state’s CDL manual and federal safety regulations. Students may learn about federal rules that apply to truck and cargo transportation, and they may learn how to complete relevant paperwork associated with transporting freight. Instruction then moves outdoors where students learn how to perform a pre-trip truck and freight inspection. Significant time is devoted to behind-the-wheel training. Drivers enrolled in CDL training practice their truck driving skills while accompanied by a driver that...
Read Full Course Description
Start Date: Oct 12, 2024
End Date: Dec 15, 2024
Community College: Paul D. Camp
Certified Logistics Associate (CLA) (WCG) HYBRID Oct 14 – Nov 1 2024 (Test Nov. 4)
MANF 3300002
Section Code: WG17
CLA Course (Foundational Level). This course provides students with the foundational broad knowledge they will need to understand the world of supply chain and related core competencies. Learning materials include PDF textbook and e-learning modules. The Course includes modules on: the global supply chain, the logistics environment, safety, safe equipment operation, material handling equipment, quality control, workplace communication, teamwork and problem solving and using computers. NOTE: MSSC strongly recommends that individuals be at an 8th-grade math and 10th-grade reading level before taking our Courses.
Read Full Course Description
Start Date: Oct 14, 2024
End Date: Nov 04, 2024
Community College: Paul D. Camp
Truck Driver Training (WCG-SCHED) Class B WeekEND Oct 12-Dec 15 2024
TRNS 3800004
Section Code: WG4B
With a CDL Class B license, you can drive any single vehicle with a GVWR of 26,001 pounds or more. Any single vehicle with a GVWR of 26,001 pounds or more towing another vehicle with a GVWR of 10,000 pounds or less. This class includes Straight trucks, large buses, segmented buses, Trucks towing vehicles with GVWR of 10,000 pounds or less. The training school length is 3 weeks for a total of 120 hours (60 hours classroom and 60 hours hands-on). The class day is structured very close to a...
Read Full Course Description
Start Date: Oct 12, 2024
End Date: Dec 15, 2024
Community College: Paul D. Camp
25 Results
Start a new search »