Here are the trainings that match your search criteria.
And did you know, the average out-of-pocket cost is often less than $1,000? If you like what you see, to get started, fill out the form at the bottom of the page, or contact your local community college directly.
Commercial Driver’s License- WCG – SGTLC
TRNS 250002
Section Code: 79
Commercial Driver’s License.
Read Full Course Description
Start Date: Apr 07, 2025
End Date: May 01, 2025
Community College: Southwest Virginia
Commercial Driver’s – Class A Tractor Trailer (FF)
AUTO 5080033
Section Code: 67FF
Skilled drivers are in high demand! Begin your new career supporting the supply chain and have the flexibility to work locally, regionally or nationally. Class A commercial drivers license (CDL) holders are qualified to operate tractor-trailers, truck and trailer combinations, dump trucks, straight trucks, ready mix trucks, and waste management trucks – essentially any commercial vehicle on the road with exception of passenger vehicles that require a CDL. Training program consists of classroom instruction, equipment and safety checks, manual shifting skills, range practice in various backing maneuvers, and on-the-road driving....
Read Full Course Description
Start Date: Jun 23, 2025
End Date: Jul 17, 2025
Community College: Piedmont Virginia
Commercial Driver’s – Class A Tractor Trailer (FF)
AUTO 5080033
Section Code: 68FF
Skilled drivers are in high demand! Begin your new career supporting the supply chain and have the flexibility to work locally, regionally or nationally. Class A commercial drivers license (CDL) holders are qualified to operate tractor-trailers, truck and trailer combinations, dump trucks, straight trucks, ready mix trucks, and waste management trucks – essentially any commercial vehicle on the road with exception of passenger vehicles that require a CDL. Training program consists of classroom instruction, equipment and safety checks, manual shifting skills, range practice in various backing maneuvers, and on-the-road driving....
Read Full Course Description
Start Date: Jun 23, 2025
End Date: Aug 14, 2025
Community College: Piedmont Virginia
Commercial Driver’s – Class A Tractor Trailer (FF)
AUTO 5080033
Section Code: 69FF
Skilled drivers are in high demand! Begin your new career supporting the supply chain and have the flexibility to work locally, regionally or nationally. Class A commercial drivers license (CDL) holders are qualified to operate tractor-trailers, truck and trailer combinations, dump trucks, straight trucks, ready mix trucks, and waste management trucks – essentially any commercial vehicle on the road with exception of passenger vehicles that require a CDL. Training program consists of classroom instruction, equipment and safety checks, manual shifting skills, range practice in various backing maneuvers, and on-the-road driving....
Read Full Course Description
Start Date: Jul 12, 2025
End Date: Aug 31, 2025
Community College: Piedmont Virginia
Commercial Driver’s – Class A Tractor Trailer (FF)
AUTO 5080033
Section Code: 70FF
Skilled drivers are in high demand! Begin your new career supporting the supply chain and have the flexibility to work locally, regionally or nationally. Class A commercial drivers license (CDL) holders are qualified to operate tractor-trailers, truck and trailer combinations, dump trucks, straight trucks, ready mix trucks, and waste management trucks – essentially any commercial vehicle on the road with exception of passenger vehicles that require a CDL. Training program consists of classroom instruction, equipment and safety checks, manual shifting skills, range practice in various backing maneuvers, and on-the-road driving....
Read Full Course Description
Start Date: Jul 21, 2025
End Date: Aug 14, 2025
Community College: Piedmont Virginia
WCG Shielded Metal Arc Welding SMAW
WELD 2500027
Introduction to Shielded Metal Arc Welding, often referred to as stick welding. Course provides lecture and lab instruction in safety as well as the necessary utilization of the SMAW electrode in multiple positions in accordance to American Welding Society specifications. Lab provides direct hands-on applications with multiple electrode types; lectures provide operational theory with emphasis on safety. Skills acquired in SMAW are taken to the next step toward successful testing in accordance with American Welding Society specifications. Lab and lecture environments provide enhanced skills development. Students should expect an emphasis...
Read Full Course Description
Start Date: Mar 25, 2025
End Date: May 15, 2025
Community College: Rappahannock
Certified EKG Technician (WCG SCHED) Hybrid Sept 22-Oct 12 2025
HLTH 2200004
Section Code: WG1A
As an EKG Technician you may perform some or all of the following tasks such as set up and administer EKGs (electrocardiograms) and stress tests, prepare patients for Holter or ambulatory monitoring, edit and deliver final test results to physicians for analysis, schedule appointments, transcribe physicians interpretations and more.
Read Full Course Description
Start Date: Sep 22, 2025
End Date: Oct 12, 2025
Community College: Paul D. Camp
Commercial Driver’s – Class A Tractor Trailer (FF)
AUTO 5080033
Section Code: 62FF
Skilled drivers are in high demand! Begin your new career supporting the supply chain and have the flexibility to work locally, regionally or nationally. Class A commercial drivers license (CDL) holders are qualified to operate tractor-trailers, truck and trailer combinations, dump trucks, straight trucks, ready mix trucks, and waste management trucks – essentially any commercial vehicle on the road with exception of passenger vehicles that require a CDL. Training program consists of classroom instruction, equipment and safety checks, manual shifting skills, range practice in various backing maneuvers, and on-the-road driving....
Read Full Course Description
Start Date: Mar 31, 2025
End Date: Apr 24, 2025
Community College: Piedmont Virginia
Introduction to Air Conditioning (FF)
HVAC 5120004
Section Code: 50FF
Learn the basics of air conditioning systems including tools, fasteners, tubing, copper, soldering/brazing, thermodynamic principles, the relationship of temperature and pressure, system components, refrigerants, service procedures (recovery/recycling, evacuation, leak detection, charging), metering devices, basic troubleshooting, controls, and compressors. Upon successful completion of this course, students are eligible to sit for the EPA Section 608 for Heating, Ventilation, Air Conditioning & Refrigerant professionals credential exam offered by ESCO Group. Note: This is the first course in the HVAC Fundamentals series.
Read Full Course Description
Start Date: Apr 08, 2025
End Date: May 13, 2025
Community College: Piedmont Virginia
Introduction to Construction (FF)
BLDG 5020199
Section Code: 81FF
Begin your career in the skilled trades with a strong foundation! Previously known as core craft skills, this entry-level course is the recommended first course for all trades students and a prerequisite to most specialty courses. Topics include basic safety, construction math, introduction to hand and power tools, construction drawings, basic rigging, communication skills, employability skills and material handling. Upon successful completion of this course, students are eligible to sit for the Introduction to Construction credential exam offered by the National Center for Construction Education & Research (NCCER).
Read Full Course Description
Start Date: Apr 09, 2025
End Date: May 12, 2025
Community College: Piedmont Virginia
Introduction to Construction (FF)
BLDG 5020199
Section Code: 82FF
Begin your career in the skilled trades with a strong foundation! Previously known as core craft skills, this entry-level course is the recommended first course for all trades students and a prerequisite to most specialty courses. Topics include basic safety, construction math, introduction to hand and power tools, construction drawings, basic rigging, communication skills, employability skills and material handling. Upon successful completion of this course, students are eligible to sit for the Introduction to Construction credential exam offered by the National Center for Construction Education & Research (NCCER).
Read Full Course Description
Start Date: May 03, 2025
End Date: May 31, 2025
Community College: Piedmont Virginia
Commercial Driver’s – Class A Tractor Trailer (FF)
AUTO 5080033
Section Code: 63FF
Skilled drivers are in high demand! Begin your new career supporting the supply chain and have the flexibility to work locally, regionally or nationally. Class A commercial drivers license (CDL) holders are qualified to operate tractor-trailers, truck and trailer combinations, dump trucks, straight trucks, ready mix trucks, and waste management trucks – essentially any commercial vehicle on the road with exception of passenger vehicles that require a CDL. Training program consists of classroom instruction, equipment and safety checks, manual shifting skills, range practice in various backing maneuvers, and on-the-road driving....
Read Full Course Description
Start Date: Apr 28, 2025
End Date: May 22, 2025
Community College: Piedmont Virginia
Commercial Driver’s – Class A Tractor Trailer (FF)
AUTO 5080033
Section Code: 64FF
Skilled drivers are in high demand! Begin your new career supporting the supply chain and have the flexibility to work locally, regionally or nationally. Class A commercial drivers license (CDL) holders are qualified to operate tractor-trailers, truck and trailer combinations, dump trucks, straight trucks, ready mix trucks, and waste management trucks – essentially any commercial vehicle on the road with exception of passenger vehicles that require a CDL. Training program consists of classroom instruction, equipment and safety checks, manual shifting skills, range practice in various backing maneuvers, and on-the-road driving....
Read Full Course Description
Start Date: Apr 28, 2025
End Date: Jun 19, 2025
Community College: Piedmont Virginia
Plumbing – Level 1 (FF)
PLMB 5150002
Section Code: 50FF
Master the basic concepts to prepare for entry-level employment in the plumbing industry. Topics include the plumbing profession, plumbing safety, tools of the trade, plumbing math, drawings, pipe and fitting types (plastic, copper, cast-iron and steel), fixtures, and an overview of drain, waste, and vent (DWV) systems, and water distribution systems. Upon successful completion of this course, students are eligible to sit for the Plumbing – Level 1 credential exam offered by the National Center for Construction Education & Research (NCCER). Prerequisite: Successful completion of Introduction to Construction.
Read Full Course Description
Start Date: May 14, 2025
End Date: Aug 20, 2025
Community College: Piedmont Virginia
Commercial Driver’s – Class A Tractor Trailer (FF)
AUTO 5080033
Section Code: 65FF
Skilled drivers are in high demand! Begin your new career supporting the supply chain and have the flexibility to work locally, regionally or nationally. Class A commercial drivers license (CDL) holders are qualified to operate tractor-trailers, truck and trailer combinations, dump trucks, straight trucks, ready mix trucks, and waste management trucks – essentially any commercial vehicle on the road with exception of passenger vehicles that require a CDL. Training program consists of classroom instruction, equipment and safety checks, manual shifting skills, range practice in various backing maneuvers, and on-the-road driving....
Read Full Course Description
Start Date: May 17, 2025
End Date: Jul 06, 2025
Community College: Piedmont Virginia
Solar Technician (FF)
BLDG 5020202
Section Code: 80FF
Gain the knowledge and skills to design, install and maintain solar systems! This course will introduce you to photovoltaic (PV) design, installation, and maintenance of solar systems. The classroom theory and hands-on training will cover the following learning objectives: markets and applications, safety basics, electricity basics, solar energy fundamentals, module fundamentals, system components, system sizing principles, system electrical and mechanical design and performance analysis, maintenance, and troubleshooting. Upon successful completion of this course, students are eligible to sit for the Photovoltaic Association credential exam offered by the North American Board...
Read Full Course Description
Start Date: May 19, 2025
End Date: May 23, 2025
Community College: Piedmont Virginia
Electrical – Level 1 (FF)
ELEC 5140002
Section Code: 81FF
Master the basic concepts to prepare for entry-level employment in the electrical industry. Topics include orientation to the electrical trade, circuits, electrical theory, National Electric Code, device boxes, hand bending, raceways and fittings, conductors and cables, residential electrical services and electrical test equipment. Upon successful completion of this course, students are eligible to sit for the Electrical – Level 1 credential exam offered by the National Center for Construction Education & Research (NCCER). Prerequisite: Successful completion of Introduction to Construction.
Read Full Course Description
Start Date: May 20, 2025
End Date: Jul 29, 2025
Community College: Piedmont Virginia
Commercial Driver’s – Class A Tractor Trailer (FF)
AUTO 5080033
Section Code: 66FF
Skilled drivers are in high demand! Begin your new career supporting the supply chain and have the flexibility to work locally, regionally or nationally. Class A commercial drivers license (CDL) holders are qualified to operate tractor-trailers, truck and trailer combinations, dump trucks, straight trucks, ready mix trucks, and waste management trucks – essentially any commercial vehicle on the road with exception of passenger vehicles that require a CDL. Training program consists of classroom instruction, equipment and safety checks, manual shifting skills, range practice in various backing maneuvers, and on-the-road driving....
Read Full Course Description
Start Date: May 27, 2025
End Date: Jun 20, 2025
Community College: Piedmont Virginia
Introduction to Construction (FF)
BLDG 5020199
Section Code: 83FF
Begin your career in the skilled trades with a strong foundation! Previously known as core craft skills, this entry-level course is the recommended first course for all trades students and a prerequisite to most specialty courses. Topics include basic safety, construction math, introduction to hand and power tools, construction drawings, basic rigging, communication skills, employability skills and material handling. Upon successful completion of this course, students are eligible to sit for the Introduction to Construction credential exam offered by the National Center for Construction Education & Research (NCCER).
Read Full Course Description
Start Date: Jun 14, 2025
End Date: Jul 12, 2025
Community College: Piedmont Virginia
Power Line Worker – Group A
ELEC 3850079
Section Code: CC01
NCCER’s Power Line Worker program covers the fundamental aspects of power line worker to include safety, electrical theory, climbing techniques, aerial framing and rigging, and operating utility service equipment. Its modules cover topics such as: Power Line Worker Safety Introduction to Electrical Circuits Introduction to Electrical Theory Climbing Wooden Poles Climbing Structures Other Than Wood Tools of the Trade Aerial Framing and Associated Hardware Utility Service Equipment Rigging Setting and Pulling Poles Trenching, Excavating, and Boring Equipment Introduction to Electrical Test Equipment Format: In-Person Length: 320 Course Hours Curriculum Requirement:...
Read Full Course Description
Start Date: Sep 29, 2025
End Date: Nov 20, 2025
Community College: Patrick & Henry
Outside Machinist (WCG SCHED) April 14-25 2025 (Wilkerson)
MANF 3600002
Section Code: WG4B
Outside Machinist Level 1 – this is 2 weeks (80 hours) long designed to prepare candidates to enter the outside machinist department at NNS. The course will cover safety, an introduction to a variety of tools and machinist skills, a validation of basic machinist competencies, and an evaluation of employability skills. This program is designed to be 90% hands-on, focusing on a candidates ability to follow verbal and written instruction, display manual dexterity consistent with the craft, accomplish specific tasks in a reasonable time, and perform all activities in a...
Read Full Course Description
Start Date: Apr 14, 2025
End Date: Apr 25, 2025
Community College: Paul D. Camp
NCCER IM E&I Level 4 (WCG SCHED) April 21-June 30 2025
ELEC 3400008
Section Code: WG1A
NCCER ( National Center for Construction Education and Research) Industrial Maintenance, Electrical and Instrumentation Level 4. Key content includes Standby and Emergency Systems, Instrument Calibration and Configuration, Basic Process, Control Elements, Transducers, and Transmitters, Control Valves, Actuators, and Positioners, Performing Loop Checks, Troubleshooting and Commissioning a Loop, Process Control Loops and Tuning, Data Networks, PLCs and Distributed Control Systems. NOTE: Must be 18 years old.
Read Full Course Description
Start Date: Apr 21, 2025
End Date: Jun 30, 2025
Community College: Paul D. Camp
Certified EKG Technician WCG HYBRID May 5 June 1 2025
HLTH 2200001
Section Code: WG1A
Spring 2021 EKG Certification (WCG) is hybrid class with course material on-line and hands-on labs will be scheduled by Healthcare Coordinator for small groups to work in skills lab at the Franklin WFC. Certified EKG Technician (CET) National Healthcareer Association (NHA). Learn to perform tasks such as set up and administer EKGs (electrocardiograms) and stress tests, prepare patients for Holter or ambulatory monitoring, edit and deliver final test results to physicians for analysis, schedule appointments, and transcribe physicians interpretations. The need for qualified EKG technicians continues to rise as the aging population in...
Read Full Course Description
Start Date: May 05, 2025
End Date: Jun 01, 2025
Community College: Paul D. Camp
Rigger and Signal Person (WITH NCCER CORE) May 6-June 10 2025
MANF 4160001
Section Code: WG1A
Upon completion of this NCCER Rigger and Signal Person certification course, students will have gained familiarity with basic rigging practices, crane safety, emergency procedures, principles of cranes, and crane communications. Additionally, students who successfully complete this course will be awarded Basic Rigger and Signal Person credentials by NCCER. Module 1, Rigging Practices; Module 2, Crane Safety and Emergency Procedures; Module 3, Basic Principles of Cranes; and Module 4, Crane Communications will be covered.
Read Full Course Description
Start Date: May 06, 2025
End Date: Jun 10, 2025
Community College: Paul D. Camp
Outside Machinist (WCG SCHED) May 12-23 2025 (T Willis)
MANF 3600002
Section Code: WG5B
Outside Machinist Level 1 – this is 2 weeks (80 hours) long designed to prepare candidates to enter the outside machinist department at NNS. The course will cover safety, an introduction to a variety of tools and machinist skills, a validation of basic machinist competencies, and an evaluation of employability skills. This program is designed to be 90% hands-on, focusing on a candidates ability to follow verbal and written instruction, display manual dexterity consistent with the craft, accomplish specific tasks in a reasonable time, and perform all activities in a...
Read Full Course Description
Start Date: May 12, 2025
End Date: May 23, 2025
Community College: Paul D. Camp
1088 Results
| Page 11 of 44
Start a new search »