FF CREDENTIALS

Credential Training Available Near You

Here are the trainings that match your search criteria.

And did you know, the average out-of-pocket cost is often less than $1,000? If you like what you see, to get started, fill out the form at the bottom of the page, or contact your local community college directly.

SHRM Certification Prep+

BUSC 1040025
Section Code: 32E
Course and Certification Exam Prerequisites: Sitting for the industry certification exam is an expectation for FastForward programs. Therefore, you must meet SHRM eligibility criteria for the exam before registering for this course. SHRM-CP and SHRM-SCP exam eligibility requirements can be found at: https://www.shrm.org/credentials/certification/eligibility-criteria Note: Candidates for the SHRM-CP certification are not required to hold an HR title and do not need a degree or previous HR experience to apply; however, a basic working knowledge of HR practices and principles or a degree from an aligned program are recommended. Course Description: Learn@Home:... Read Full Course Description
Start Date: Apr 14, 2026 End Date: May 21, 2026
Community College: Northern Virginia
Sign Up Now   Need Help?

Commercial Driver’s License: Class A Truck Driver Training

TRNS 3850099
Section Code: CC02
Get your CDL license in as little as four weeks and get started on one of the most in-demand careers in the country. The CDL: Class A (E Restriction – Automatic Shift) Truck Driver Training curriculum teaches students how to inspect and operate tractor trailers and to assume driver responsibilities on the road and at pickup/delivery points. This program prepares students to sit for the Virginia CDL examination. Emphasis is placed on the following: vehicle inspections defensive driving range maneuvers motor carrier safety regulations trip planning cargo handling size/weight laws... Read Full Course Description
Start Date: Apr 18, 2026 End Date: Jun 07, 2026
Community College: Patrick & Henry
Sign Up Now   Need Help?

Commercial Driver’s License: Class A Truck Driver Training

TRNS 3850099
Section Code: CC03
Get your CDL license in as little as four weeks and get started on one of the most in-demand careers in the country. The CDL: Class A (E Restriction – Automatic Shift) Truck Driver Training curriculum teaches students how to inspect and operate tractor trailers and to assume driver responsibilities on the road and at pickup/delivery points. This program prepares students to sit for the Virginia CDL examination. Emphasis is placed on the following: vehicle inspections defensive driving range maneuvers motor carrier safety regulations trip planning cargo handling size/weight laws... Read Full Course Description
Start Date: Jun 13, 2026 End Date: Aug 02, 2026
Community College: Patrick & Henry
Sign Up Now   Need Help?

Marine Welder Level 1 (WCG) DAY April 13 – May 1 2026

WELD 3930001
Section Code: WG4B
The course is 3 weeks (120 hours) long, designed to prepare candidates to enter a career in Marine Welding at various shipyards in the region. The course will cover the basics of stick welding with the AWS certification test included on the last day of class. The course provides the skills necessary for entry-level employment in the ship repair industry. Students for this class will be screened and selected by the Virginia Ship Repair Association (VSRP). For selection requirements, please see shiprepairtraining.com. In a partnership with the Virginia Ship Repair Association,... Read Full Course Description
Start Date: Apr 13, 2026 End Date: May 01, 2026
Community College: Paul D. Camp
Sign Up Now   Need Help?

Truck Driver Training (WCG-SCHED) Class A WeekDAY April 20-May 15 2026

TRNS 3800002
Section Code: WG6B
This 120-hour course includes classroom and hands-on instruction. Students will learn applicable traffic and trucking laws from their state’s CDL manual and federal safety regulations. Students may learn about federal rules that apply to truck and cargo transportation, and they may learn how to complete relevant paperwork associated with transporting freight. Instruction then moves outdoors where students learn how to perform a pre-trip truck and freight inspection. Significant time is devoted to behind-the-wheel training. Drivers enrolled in CDL training practice their truck driving skills while accompanied by a driver that... Read Full Course Description
Start Date: Apr 20, 2026 End Date: May 15, 2026
Community College: Paul D. Camp
Sign Up Now   Need Help?

Truck Driver Training (WCG-SCHED) Class B WeekDAY April 20 – May 15 2026

TRNS 3800004
Section Code: 81B
With a CDL Class B license, you can drive any single vehicle with a GVWR of 26,001 pounds or more. Any single vehicle with a GVWR of 26,001 pounds or more towing another vehicle with a GVWR of 10,000 pounds or less. This class includes Straight trucks, large buses, segmented buses, Trucks towing vehicles with GVWR of 10,000 pounds or less. The training school length is 3 weeks for a total of 120 hours (60 hours classroom and 60 hours hands-on). The class day is structured very close to a... Read Full Course Description
Start Date: Apr 20, 2026 End Date: May 15, 2026
Community College: Paul D. Camp
Sign Up Now   Need Help?

Fast Track Welding (WCG-SCHED) Evening May 18 – June 29 2026

WELD 4020002
Section Code: WG1B
The Fast Track Welding Program is a rigorous 3 week class, 20% instructional and 80% hands on training in welding that prepares students for the American Welding Society (AWS) Certification process. The program is designed to meet the workforce needs of regional and area employers. Read Full Course Description
Start Date: May 18, 2026 End Date: Jun 29, 2026
Community College: Paul D. Camp
Sign Up Now   Need Help?

Cert. Clinical Med. Assistant (CCMA) WCG HYBRID-BUNDLE JULY 13 – DEC 13 2026

HLTH 2100001
Section Code: WG1A
Clinical Medical Assistant Certification (WCG) is hybrid with course material on-line and hands-on labs. A medical assistant is a multi-skilled allied health care professional that specializes in procedures commonly performed in the ambulatory health care setting. Medical assistants perform both clinical and administrative duties and assist a variety of providers including physicians, nurse practitioners and physician assistants. They typically work in medical offices, clinics, urgent care centers and may work in general medicine or specialty practices. Common duties of a medical assistant include administrative and clinical tasks such as checking... Read Full Course Description
Start Date: Jul 13, 2026 End Date: Dec 13, 2026
Community College: Paul D. Camp
Sign Up Now   Need Help?

SHRM Certification Prep+

BUSC 1040025
Section Code: 33E
Course and Certification Exam Prerequisites: Sitting for the industry certification exam is an expectation for FastForward programs. Therefore, you must meet SHRM eligibility criteria for the exam before registering for this course. SHRM-CP and SHRM-SCP exam eligibility requirements can be found at: https://www.shrm.org/credentials/certification/eligibility-criteria Note: Candidates for the SHRM-CP certification are not required to hold an HR title and do not need a degree or previous HR experience to apply; however, a basic working knowledge of HR practices and principles or a degree from an aligned program are recommended. Course Description: Learn@Home:... Read Full Course Description
Start Date: Mar 21, 2026 End Date: May 16, 2026
Community College: Northern Virginia
Sign Up Now   Need Help?

Plumbing Level 1 – WCG

EDUC 5400138
Section Code: 01FF
The program is offered as a 84 hour course. Students will learn about the plumbing profession, safety, tools of the trade, plumbing math, drawing, plastic pipes and fittings, copper tube and fittings, cast iron pipes and fittings, steel pipes and fittings, plumbing fixtures, removal of liquid and solid waste, and water distribution. Upon successful completion, graduates will be eligible to sit for the NCCER Plumbing Level 1 Certification exam. Read Full Course Description
Start Date: Jul 07, 2026 End Date: Aug 22, 2026
Community College: New River
Sign Up Now   Need Help?

Heavy Equipment Operator Level 1 – WCG

MANF 8200050
Section Code: 01FF
Heavy Equipment Operator was developed to meet the growing employment demands for equipment operators. Students receive hands-on training using simulators, which replicates real-life operating scenarios through rotation-motion platforms and high resolution 3-D. Read Full Course Description
Start Date: Jul 07, 2026 End Date: Jul 25, 2026
Community College: New River
Sign Up Now   Need Help?

HVAC Level 1

HVAC 6250014
Section Code: 2223
SPECIAL NOTICE* Virginia state funding for FastForward programs will be significantly reduced starting June 6, 2025. Please contact us to explore available funding options by emailing us at workforce@laurelridge.edu or calling at 540-868-7021. This program is eligible for G3 Grants that cover 1/3 of the cost of the class – based on financial eligibility. These programs are short-term training courses resulting in industry credentials for high-demand professions in our region. HVAC 1 Program Pricing: Regular/Full Price: $3,795 FANTIC cost: $2,530 Course Description: This class serves as the first... Read Full Course Description
Start Date: Aug 31, 2026 End Date: Feb 22, 2027
Community College: Laurel Ridge
Sign Up Now   Need Help?

Core Craft Skills HVAC Level 1

BLDG 6000021
Section Code: 2224
This class serves as the foundation to all trade apprenticeship programs. Students will learn the necessary basics to start a career in any skilled trade. Topics covered in this class are: Basic Safety, Introduction to Construction Math, Introduction to Hand Tools, Introduction to Power Tools, Introduction to Construction Drawings, Basic Communication Skills, Basic Employability Skills, and Introduction to Materials Handling. Read Full Course Description
Start Date: Aug 31, 2026 End Date: Feb 22, 2027
Community College: Laurel Ridge
Sign Up Now   Need Help?

HVAC Level 2

HVAC 6250015
Section Code: 2225
Course Description: This class serves as the second level of training in the HVAC craft. Structured as a hybrid class, a combination of online training and live classroom/lab training, students learn the following content: Commercial Airside Systems; Chimneys, Vents, and Flues; Introduction to Hydronic Systems; Air Quality Equipment; Leak Detection, Evacuation, Recovery, and Charging; Alternating Current; Basic Electronics; Introduction to Circuit Troubleshooting; Troubleshooting Gas Heating; Troubleshooting Cooling; Heat Pumps; Basic Installation and Maintenance Practices; Sheet Metal Duct Systems. Students are required to purchase the current HVAC Code book... Read Full Course Description
Start Date: Sep 01, 2026 End Date: Feb 09, 2027
Community College: Laurel Ridge
Sign Up Now   Need Help?

HVAC Level 3

HVAC 6250016
Section Code: 2226
Course Description: This class serves as the third year of training in the HVAC craft. Structured as a hybrid class, a combination of online training and live classroom/lab training, students learn the following content: Refrigerants and Oils; Compressors; Metering Devices; Retail Refrigeration Systems; Commercial Hydronic Systems; Steam Systems; Planned Maintenance; Water Treatment; Troubleshooting Electronic Controls; Troubleshooting Oil Heating; Troubleshooting Heat Pumps; Troubleshooting Accessories. Textbook, Online Access Code, and all materials are included. Students are required to purchase the current HVAC Code book for class. Computer and internet access are... Read Full Course Description
Start Date: Sep 02, 2026 End Date: Feb 17, 2027
Community College: Laurel Ridge
Sign Up Now   Need Help?

HVAC Level 4

HVAC 6250017
Section Code: 2227
Course Description: This class serves as the fourth and final level of training in the HVAC craft. Structured as a hybrid class, a combination of online training and live classroom/lab training, students learn the following content: Construction Drawings and Specifications, System Balancing, Indoor Air Quality, Energy Conservation Equipment, Building Management Systems, Systems Startup and Shutdown, Heating and Cooling System Design, Commercial and Industrial Refrigeration Systems, Alternative Heating and Cooling Systems, Introduction to Supervisory Skills. Students are required to purchase the current HVAC Code book for class. Computer and... Read Full Course Description
Start Date: Sep 03, 2026 End Date: Feb 18, 2027
Community College: Laurel Ridge
Sign Up Now   Need Help?

Electrical Level 4

ELEC 6150011
Section Code: 2196
Course Description: This class serves as the fourth level of training in the Electrical craft. Structured as a hybrid class, a combination of online training and live classroom/lab training, students learn the following content: Load Calculations-Feeders & Services Health Care Facilities Standby and Emergency Systems Basic Electronic Theory Fire Alarm Systems Specialty Transformers Heat Tracing and Freeze Protection Motor Operation and Maintenance Medium Voltage Termination/Splices Special Locations Fundamentals of Crew Leadership Students are required to purchase the current Electrical Code book for class. Computer and internet access are... Read Full Course Description
Start Date: Sep 03, 2026 End Date: Feb 18, 2027
Community College: Laurel Ridge
Sign Up Now   Need Help?

CompTIA A+ Prep and Certification

ITEC 3100212
Section Code: 2153
SPECIAL NOTICE* Virginia state funding for FastForward programs will be significantly reduced starting June 6, 2025. Please contact us to explore available funding options by emailing us at workforce@laurelridge.edu or calling at 540-868-7021. This is a G3 FastForward Grant Program: These programs are short-term training courses resulting in industry credentials for high-demand professions in our region. CompTIA A+ Program Pricing: Regular/Full Price: $3,498 Prerequisite: CompTIA IT Fundamentals or IT degree obtained within the last 5 years Course Description: In this course, we will cover both the Core... Read Full Course Description
Start Date: Sep 08, 2026 End Date: Nov 05, 2026
Community College: Laurel Ridge
Sign Up Now   Need Help?

Medical Assistant Program (CCMA)

HLTH 4300148
Section Code: 2202
SPECIAL NOTICE* Virginia state funding for FastForward programs will be significantly reduced starting June 6, 2025. Please contact us to explore available funding options by emailing us at workforce@laurelridge.edu or calling at 540-868-7021. This is a G3 FastForward Grant Program: These programs are short-term training courses resulting in industry credentials for high-demand professions in our region. Medical Assistant Program Pricing: Regular/Full Price: $3,900 Prerequisite: HS Diploma, GED, or you are scheduled to earn your GED within the next 12 months. Computer and regular internet access are required Course Description:... Read Full Course Description
Start Date: Sep 09, 2026 End Date: Dec 02, 2026
Community College: Laurel Ridge
Sign Up Now   Need Help?

Class A Commercial Driver s License

TRNS 8000002
Section Code: 02SA
Prepares students with the knowledge and skills to take the Commercial DriverÂ’s License (CDL) exam. The program consists of general knowledge, air brakes, and combination vehicles. Students will learn CDL laws, use of controls, safe driving techniques and defensive driving. The course includes classroom instruction and behind-the-wheel training. Students will take practices tests designed to prepare them for the CDL permit exam. Training will prepare students for an entry-level position in the trucking industry. Lecture 40 hours. 80 Driving hours. Total 120 hours. Qualifications: Students must have a valid Virginia... Read Full Course Description
Start Date: Apr 06, 2026 End Date: May 07, 2026
Community College: Mountain Empire
Sign Up Now   Need Help?

Class A Commercial Driver s License

TRNS 8000002
Section Code: 04SA
Prepares students with the knowledge and skills to take the Commercial DriverÂ’s License (CDL) exam. The program consists of general knowledge, air brakes, and combination vehicles. Students will learn CDL laws, use of controls, safe driving techniques and defensive driving. The course includes classroom instruction and behind-the-wheel training. Students will take practices tests designed to prepare them for the CDL permit exam. Training will prepare students for an entry-level position in the trucking industry. Lecture 40 hours. 80 Driving hours. Total 120 hours. Qualifications: Students must have a valid Virginia... Read Full Course Description
Start Date: May 07, 2026 End Date: Jun 04, 2026
Community College: Mountain Empire
Sign Up Now   Need Help?

Class A Commercial Driver s License

TRNS 8000002
Section Code: 03SA
Prepares students with the knowledge and skills to take the Commercial DriverÂ’s License (CDL) exam. The program consists of general knowledge, air brakes, and combination vehicles. Students will learn CDL laws, use of controls, safe driving techniques and defensive driving. The course includes classroom instruction and behind-the-wheel training. Students will take practices tests designed to prepare them for the CDL permit exam. Training will prepare students for an entry-level position in the trucking industry. Lecture 40 hours. 80 Driving hours. Total 120 hours. Qualifications: Students must have a valid Virginia... Read Full Course Description
Start Date: Jun 01, 2026 End Date: Jul 02, 2026
Community College: Mountain Empire
Sign Up Now   Need Help?

Power Line Worker I

ELEC 8000001
Section Code: 3
Prepares students with the basic skills necessary to enter the electrical field as a Lineman. These skills include: overall safety considerations, power pole climbing skills, knowledge of the basic tools and materials involved with the electrical line crafts, general construction standards, basic rigging principles, and basic electrical theory that is specific to this trade. Classes introduce students to job related information and hands-on training. A component of the course includes preparation for the Construction and Skilled Trades (CAST) exam. Qualifications: Students must weigh no more than 270 lbs. Students will... Read Full Course Description
Start Date: Jun 08, 2026 End Date: Sep 03, 2026
Community College: Mountain Empire
Sign Up Now   Need Help?

Pharmacy Technician Program

HLTH 4300465
Section Code: 1838
SPECIAL NOTICE* Virginia state funding for FastForward programs will be significantly reduced starting June 6, 2025. Please contact us to explore available funding options by emailing us at workforce@laurelridge.edu or calling at 540-868-7021. This is a G3 FastForward Grant Program: These programs are short-term training courses resulting in industry credentials for high-demand professions in our region. Pharmacy Technician Program Pricing: Regular/Full Price: $3,585 Course Description: Get started today on an exciting career path! The Pharmacy Technician Program is a comprehensive and engaging educational experience designed to equip aspiring... Read Full Course Description
Start Date: Apr 21, 2026 End Date: Jul 07, 2026
Community College: Laurel Ridge
Sign Up Now   Need Help?

Medical Assistant Program (CCMA)

HLTH 4300148
Section Code: 1835
SPECIAL NOTICE* Virginia state funding for FastForward programs will be significantly reduced starting June 6, 2025. Please contact us to explore available funding options by emailing us at workforce@laurelridge.edu or calling at 540-868-7021. This is a G3 FastForward Grant Program: These programs are short-term training courses resulting in industry credentials for high-demand professions in our region. Medical Assistant Program Pricing: Regular/Full Price: $3,900 Prerequisite: HS Diploma, GED, or you are scheduled to earn your GED within the next 12 months. Computer and regular internet access are required Mandatory In... Read Full Course Description
Start Date: Jul 20, 2026 End Date: Nov 18, 2026
Community College: Laurel Ridge
Sign Up Now   Need Help?