Here are the trainings that match your search criteria.
And did you know, the average out-of-pocket cost is often less than $1,000? If you like what you see, to get started, fill out the form at the bottom of the page, or contact your local community college directly.
Gas Tungsten Arc Welding
WELD 3900010
Section Code: W07
Students will learn to perform 1/4 and 3/8 fillet welds on carbon steel in the horizontal (2F), vertical (3F), and overhead (4F) positions. In addition students will learn safe practices, GTAW welding theory, weldability of materials such as stainless steel and aluminum, welding terms and definitions, and visual inspection techniques for GTAW welds.
Read Full Course Description
Start Date: Jul 14, 2025
End Date: Aug 14, 2025
Community College: Virginia Peninsula
Gas Tungsten Arc Welding
WELD 3900010
Section Code: W09
Students will learn to perform 1/4 and 3/8 fillet welds on carbon steel in the horizontal (2F), vertical (3F), and overhead (4F) positions. In addition students will learn safe practices, GTAW welding theory, weldability of materials such as stainless steel and aluminum, welding terms and definitions, and visual inspection techniques for GTAW welds.
Read Full Course Description
Start Date: Jul 14, 2025
End Date: Aug 14, 2025
Community College: Virginia Peninsula
Gas Tungsten Arc Welding
WELD 3900010
Section Code: W11
Students will learn to perform 1/4 and 3/8 fillet welds on carbon steel in the horizontal (2F), vertical (3F), and overhead (4F) positions. In addition students will learn safe practices, GTAW welding theory, weldability of materials such as stainless steel and aluminum, welding terms and definitions, and visual inspection techniques for GTAW welds.
Read Full Course Description
Start Date: Jul 14, 2025
End Date: Aug 14, 2025
Community College: Virginia Peninsula
Introductory Craft Skills – NCCER Core
MANF 3500021
Section Code: W07
The NCCER Core Curriculum-Introductory Craft Skills is a prerequisite to all other NCCER Level 1 craft curriculum. The course includes key content such as Basic Safety, Introduction to Construction Math, Introduction to Hand Tools, Introduction to Power Tools, Construction Drawings, Basic Rigging, Basic Communication Skills, Basic Employability Skills and Introduction to Materials Handling. Upon successful completion of this course the student will have a good foundation on which to build any of the specific NCCER crafts.
Read Full Course Description
Start Date: Jul 07, 2025
End Date: Aug 07, 2025
Community College: Virginia Peninsula
Introductory Craft Skills – NCCER Core
MANF 3500021
Section Code: P86
The NCCER Core Curriculum-Introductory Craft Skills is a prerequisite to all other NCCER Level 1 craft curriculum. The course includes key content such as Basic Safety, Introduction to Construction Math, Introduction to Hand Tools, Introduction to Power Tools, Construction Drawings, Basic Rigging, Basic Communication Skills, Basic Employability Skills and Introduction to Materials Handling. Upon successful completion of this course the student will have a good foundation on which to build any of the specific NCCER crafts.
Read Full Course Description
Start Date: Jul 07, 2025
End Date: Aug 07, 2025
Community College: Virginia Peninsula
Certified Welder
WELD 3900023
Section Code: P86
Students will learn to perform 1/4 and 3/8 fillet welds on carbon steel in the flat (1F), horizontal (2F), and vertical (3F) positions. In addition students will learn safe practices, GTAW welding theory, weld ability of materials such as stainless stell and aluminum, welding terms and definitions, and visual inspection techniques for GTAW welds.
Read Full Course Description
Start Date: Jul 07, 2025
End Date: Aug 14, 2025
Community College: Virginia Peninsula
Certified Welder
WELD 3900023
Section Code: P88
Students will learn to perform 1/4 and 3/8 fillet welds on carbon steel in the flat (1F), horizontal (2F), and vertical (3F) positions. In addition, students will learn safe practices, GTAW welding theory, weld ability of materials such as stainless steel and aluminum, welding terms and definitions, and visual inspection techniques for GTAW welds.
Read Full Course Description
Start Date: Jul 07, 2025
End Date: Aug 14, 2025
Community College: Virginia Peninsula
Certified Welder
WELD 3900023
Section Code: P90
Students will learn to perform 1/4 and 3/8 fillet welds on carbon steel in the flat (1F), horizontal (2F), and vertical (3F) positions. In addition, students will learn safe practices, GTAW welding theory, weld ability of materials such as stainless steel and aluminum, welding terms and definitions, and visual inspection techniques for GTAW welds.
Read Full Course Description
Start Date: Jul 07, 2025
End Date: Aug 14, 2025
Community College: Virginia Peninsula
Certified Welder
WELD 3900023
Section Code: W07
Students will learn to perform 1/4 and 3/8 fillet welds on carbon steel in the flat (1F), horizontal (2F), and vertical (3F) positions. In addition, students will learn safe practices, GTAW welding theory, weld ability of materials such as stainless steel and aluminum, welding terms and definitions, and visual inspection techniques for GTAW welds.
Read Full Course Description
Start Date: Jul 07, 2025
End Date: Aug 14, 2025
Community College: Virginia Peninsula
Certified Welder
WELD 3900023
Section Code: W09
Students will learn to perform 1/4 and 3/8 fillet welds on carbon steel in the flat (1F), horizontal (2F), and vertical (3F) positions. In addition, students will learn safe practices, GTAW welding theory, weld ability of materials such as stainless steel and aluminum, welding terms and definitions, and visual inspection techniques for GTAW welds.
Read Full Course Description
Start Date: Jul 07, 2025
End Date: Aug 14, 2025
Community College: Virginia Peninsula
Marine Electrician Course
ELEC 3700005
Section Code: P80
Students will learn the importance of first time quality and quality work in general, basic ship terms and compartmentation, basic math (including using fractions and 1/10ths of an inch), equipment mounting techniques and the use of basic hand tools, ruler reading/basic measurement, cableway and cable installation, cable cut-in and hook-up practices (USN style receptacles, lighting, power distribution boxes (single and 3 phase) and connection boxes, and electrical safety-An understanding of the NNS process to perform an Absence of Voltage check.
Read Full Course Description
Start Date: Jun 09, 2025
End Date: Jun 23, 2025
Community College: Virginia Peninsula
CNC Turning: Operations
MANF 3000003
Section Code: P80
This certification validates that an individual is able to successfully machine parts by operating a computer numerical control (CNC) lathe; maintain quality and safety standards; keep records; maintain equipment and supplies; and perform routine preventative maintenance. Prerequisites: CNC Milling Operations.
Read Full Course Description
Start Date: Jun 16, 2025
End Date: Aug 13, 2025
Community College: Virginia Peninsula
CNC Milling: Programming, Set Up & Operations
MANF 3000004
Section Code: P82
This certification validates that an individual is able to setup and operate a CNC Milling Center; maintain quality and safety standards; keep records; maintain equipment and supplies. Prerequisites: CNC Milling Operations
Read Full Course Description
Start Date: Jun 16, 2025
End Date: Aug 13, 2025
Community College: Virginia Peninsula
Carpentry Level 2
BLDG 3100016
Section Code: W03
This course covers all aspects of Carpentry from foundation to roof. Framing, siding, roofing, and the interior finish of a home. Tools and their safe and proper operation will be emphasized, along with related power machinery and equipment. Classroom theory work will stress mathematics, measurement, print reading and drawing, estimating, and trade safety. Students enrolled in Carpentry Level 2 will be required to become familiar with the construction process by beginning with plans and site layout, to the construction of a roof. The student will become familiar with layout procedures...
Read Full Course Description
Start Date: Jun 17, 2025
End Date: Oct 30, 2025
Community College: Virginia Peninsula
CNC Turning: Operations
MANF 3000003
Section Code: W80
This certification validates that an individual is able to successfully machine parts by operating a computer numerical control (CNC) lathe; maintain quality and safety standards; keep records; maintain equipment and supplies; and perform routine preventative maintenance. Prerequisites: CNC Milling Operations.
Read Full Course Description
Start Date: Jun 17, 2025
End Date: Aug 19, 2025
Community College: Virginia Peninsula
CNC Milling: Programming, Set Up & Operations
MANF 3000004
Section Code: W03
This certification validates that an individual is able to setup and operate a CNC Milling Center; maintain quality and safety standards; keep records; maintain equipment and supplies. Prerequisites: CNC Milling Operations
Read Full Course Description
Start Date: Jun 17, 2025
End Date: Aug 19, 2025
Community College: Virginia Peninsula
Marine Electrician Course
ELEC 3700005
Section Code: P82
Students will learn the importance of first time quality and quality work in general, basic ship terms and compartmentation, basic math (including using fractions and 1/10ths of an inch), equipment mounting techniques and the use of basic hand tools, ruler reading/basic measurement, cableway and cable installation, cable cut-in and hook-up practices (USN style receptacles, lighting, power distribution boxes (single and 3 phase) and connection boxes, and electrical safety-An understanding of the NNS process to perform an Absence of Voltage check.
Read Full Course Description
Start Date: Jul 07, 2025
End Date: Jul 18, 2025
Community College: Virginia Peninsula
Marine Electrician Course
ELEC 3700005
Section Code: H11
Students will learn the importance of first time quality and quality work in general, basic ship terms and compartmentation, basic math (including using fractions and 1/10ths of an inch), equipment mounting techniques and the use of basic hand tools, ruler reading/basic measurement, cableway and cable installation, cable cut-in and hook-up practices (USN style receptacles, lighting, power distribution boxes (single and 3 phase) and connection boxes, and electrical safety-An understanding of the NNS process to perform an Absence of Voltage check.
Read Full Course Description
Start Date: Jun 09, 2025
End Date: Jun 23, 2025
Community College: Virginia Peninsula
Marine Electrician Course
ELEC 3700005
Section Code: H13
Students will learn the importance of first time quality and quality work in general, basic ship terms and compartmentation, basic math (including using fractions and 1/10ths of an inch), equipment mounting techniques and the use of basic hand tools, ruler reading/basic measurement, cableway and cable installation, cable cut-in and hook-up practices (USN style receptacles, lighting, power distribution boxes (single and 3 phase) and connection boxes, and electrical safety-An understanding of the NNS process to perform an Absence of Voltage check.
Read Full Course Description
Start Date: Jul 07, 2025
End Date: Jul 18, 2025
Community College: Virginia Peninsula
Certified Logistics Technician
MANF 3600005
Section Code: D01
This course provides students with the mid-level technical knowledge needed to understand the world of supply chain logistics and related core competencies. Learning materials include PDF textbook and e-learning modules. This course includes: product receiving, product storage, order processing, packaging and shipment, inventory control, safe handling of hazardous materials, evaluation of transportation modes, customs, and dispatch and tracking operations. This course is 40 hours.
Read Full Course Description
Start Date: May 20, 2025
End Date: Jun 19, 2025
Community College: Virginia Peninsula
HVAC Level 1
HVAC 3400008
Section Code: P85
The HVAC Level 1 course introduces students to HVAC, Trade Mathematics, Basic Electricity, Introduction to Heating, Introduction to Cooling, Introduction to Air Distribution Systems, Basic Copper and Plastic Piping Practices, Soldering and Brazing, and Basic Carbon Steel Piping Practices. The HVAC Level 1 course also explains the basic principles of heating, principles of ventilation, principles of air conditioning, and the principles of refrigeration. The course also identifies career paths available in the HVAC/R Trade; identifies the responsibilities and characteristics needed to be a successful HVAC/R technician; Identifies residential, commercial, and...
Read Full Course Description
Start Date: May 28, 2025
End Date: Aug 22, 2025
Community College: Virginia Peninsula
Certified Welder
WELD 3900023
Section Code: W03
Students will learn to perform 1/4 and 3/8 fillet welds on carbon steel in the flat (1F), horizontal (2F), and vertical (3F) positions. In addition, students will learn safe practices, GTAW welding theory, weld ability of materials such as stainless steel and aluminum, welding terms and definitions, and visual inspection techniques for GTAW welds.
Read Full Course Description
Start Date: May 19, 2025
End Date: Jun 27, 2025
Community College: Virginia Peninsula
Certified Welder
WELD 3900023
Section Code: W05
Students will learn to perform 1/4 and 3/8 fillet welds on carbon steel in the flat (1F), horizontal (2F), and vertical (3F) positions. In addition, students will learn safe practices, GTAW welding theory, weld ability of materials such as stainless steel and aluminum, welding terms and definitions, and visual inspection techniques for GTAW welds.
Read Full Course Description
Start Date: May 19, 2025
End Date: Jun 27, 2025
Community College: Virginia Peninsula
Gas Tungsten Arc Welding
WELD 3900010
Section Code: P80
Students will learn to perform 1/4 and 3/8 fillet welds on carbon steel in the horizontal (2F), vertical (3F), and overhead (4F) positions. In addition students will learn safe practices, GTAW welding theory, weldability of materials such as stainless steel and aluminum, welding terms and definitions, and visual inspection techniques for GTAW welds.
Read Full Course Description
Start Date: May 27, 2025
End Date: Jun 27, 2025
Community College: Virginia Peninsula
Gas Tungsten Arc Welding
WELD 3900010
Section Code: P82
Students will learn to perform 1/4 and 3/8 fillet welds on carbon steel in the horizontal (2F), vertical (3F), and overhead (4F) positions. In addition students will learn safe practices, GTAW welding theory, weldability of materials such as stainless steel and aluminum, welding terms and definitions, and visual inspection techniques for GTAW welds.
Read Full Course Description
Start Date: May 27, 2025
End Date: Jun 27, 2025
Community College: Virginia Peninsula
1088 Results
| Page 5 of 44
Start a new search »